[Previo por Fecha] [Siguiente por Fecha] [Previo por Hilo] [Siguiente por Hilo]
[Hilos de Discusión] [Fecha] [Tema] [Autor]Hola amigos: Pues ya me desesperé soy un novato tratando de configurar un " Internal 56K V.90 PCI Voice/Fax Windows Modem" de la marca Actiontec. Si, ya sé, no debí comprar un PCI, bla, bla, bla... bueno escribí al soporte técnico de esta empresa y me dijeron lo siguiente: For most distributions using the 2.2 kernel. 1. Log on as root2. type in the command cat /proc/pci 3. Take note the FIRST IO that is listed. I will use 0x6400 as an example. 4. Type the following commands. setserial /dev/ttyS3 port 0x400 spd_vhi ski_test auto_irq autoconfig 5. After you hit enter, and you get no errors, you will then type in the following setserial /dev/ttyS3 uart 16550A 6. Hit enter again, and make sure there are no errors Select /dev/ttyS3 as the device in whichever dial up program you are using, It should now initialize and work properly.. Bueno ya lo hize y no mas no... Alguien me puede ayudar, ¿saben de alguna documentación para este caso?, ya le intente varias cosas.. y eso que todavia no intento configurar el sonido, la impresora, escaner, quemador.. je je.. creo que me esperan un buen de HOWTO's --------------------------------------------------------------------- Lista de soporte de LinuxPPP Reglas de la lista en http://pepe.net.mx/reglas.html